Eternal Fighter Zero/FAQ

Netplay

• Does this game have rollback netcode?

Yes, with the EFZ Revival netplay client. This client also fixes Windows compatibility issues, lets you save netplay replays, and provides more and better training functions.

• Where can I find people to play with?

Join the EFZ Discord server here!

• Why can't I connect?

There are a lot of possible reasons, but the most common solution is to port forward instead of using holepunching.

• How do I port forward?

You can learn how to port forward here.

• Why can't I spectate?

Players playing via holepunching sometimes cannot be spectated. You can try to spectate while they are in delay select (before the game starts), or spectate their opponent's IP instead. If you can't connect to either player, try spectating using the IP of another spectator.

• How do I catch up to the current match when spectating?

You can spectate at up to 9x normal speed by pressing + on the numpad by default (you can change the hotkey in EfzRevival.ini). Do not forget to reduce your speed back to 1x with - on the numpad when you catch up or else the game will look choppy!

Gameplay

• What are the tiers?

There is no definitive tier list, but some opinions have been documented here.

• Are there any banned characters?

Kanna is the only banned character. Everyone else is legal, including UNKNOWN.

• Are there any banned stages?

No, but tournaments usually acknowledge that some stages pose visibility issues, especially for some characters' projectiles. Players are typically allowed to quit to character select and pick a different stage so long as they do so before the round starts. The most common offenders are the Sunset Rooftop, Infinite Sky, World of Eternity, and the daytime variants of the Snowy Park and Minase Household.

• What character should I pick? I usually like x, y and z.

Check out the Character Choice page.

• Why is the game running at 64FPS?

EFZ was designed to run at 60FPS, but it was also designed for older versions of Windows. On Windows XP and later, it runs at 64FPS and many players got accustomed to it. When EFZ Revival was made, it kept the game running at 64FPS so as to not disrupt the existing playerbase.

• What are subframes? / What does .33 or .66 mean in the frame data?

EFZ was designed to only visually run at 60FPS, but internally it ran at 180FPS (192FPS on EFZ Revival). This meant that between every visible frame, there are two frames of gameplay that are not visible to the player. For a visual example of subframes, watch this video

Controls, Options and Troubleshooting

• How do I change my controls?

In config.exe in your EFZ folder. If config.exe does not seem to be working, try using DInput_Config_Beta.exe. If you do not have said config, try downloading a newer version of EFZ Revival or asking in the EFZ Discord. If your controller's directionals do not seem to be recognized in controller config, try loading up the game anyway and seeing if they work.

• Is it possible to change sound settings?

To a degree. You can disable the BGM by default in EfzRevival.ini.

• How do I save offline replays?

The vanilla way is to go in the REPLAY menu, select a replay slot, and then select "Record Replay" (second option). When the match has ended (even prematurely via ESC), it will be saved in that slot.

If using EfzRevival's tournament mode, you can assign a folder in EfzRevival.ini to automatically save replays of all matches to. The normal setting is \Tournament, but the folder is not created by default.

• How do I save netplay replays?

Be sure you have created a \netplay folder in EFZ\replays, otherwise the replays won't save!

• How do I change the port I host on? It wont let me change from 10800 in the caster!

There's an option in the .ini for the default port.

• How do I fix "The program can’t start because MSVCR110.dll is missing from your computer."?

Download and install the x86 version of: http://www.microsoft.com/en-gb/download/details.aspx?id=30679

• Why can't I use [insert training function]?

Many training functions don't actually work in the PRACTICE mode, try VS HUMAN instead. See the training mode page for more information.

• I have found an issue with EfzRevival. How can I report it?

Email [email protected] with the issue.

How can I contribute to the wiki?

In order to get an account on Mizuumi, please refer to the instructions on the getting started page. Please ensure you read the whole getting started page before making your first edit.

Refer to this spreadsheet to see where help is needed most. All constructive contributions are much appreciated.

Can I contribute to the wiki if I am new to the game?

Yes! Just try to keep your edits to things that are easy and do not require game knowledge. Examples:

• Grammar and typo fixes
• Adding links to videos and resources from experienced players

Examples of what NOT to do:

• Do not remove anything substantial without input from a more experienced player
  • If you are helping another, more experienced editor and have been told what to remove, then this is OK.
• Do not make joke edits
  • An example of a joke edit is adding a caption for a move where the text is a meme or a joke.

As you become more experienced, you may be able to make more substantial additions. When in doubt, ask for opinions on an edit either in the EFZ Discord or on the specific page's talk page. Remember to be open to criticism.

How should I format my edits?

Our current standard for formatting is Sayuri's page. Please refer to this closely when making edits!

There is currently a bug with : indentation on this version of MediaWiki. Try to only ever use a maximum of one at a time. Example:

:Example text.

Frame Data

When collecting frame data, please use subframe step. This mod changes the function of the frame step training function to advance subframe by subframe rather than full frames. It does not affect frame stepping in replays. The file is based on EfzRevival version 1.02f, please keep a backup of your original EfzRevival.dll, especially if you are using a different version. Also, EfzRevival's input display is not designed to show subframes, so it will only increment the displayed input duration every three subframe steps. You will have to keep track of which exact subframe you are on yourself. The "Frame Step" value will increment every subframe, however.

Gameplay Images

If adding gameplay images, such as move images, please ensure that the settings in your EfzRevival.ini and CONFIG_EN.exe match the following:

EfzRevival.ini:

• WindowWidth=640
• WindowHeight=480
• BackBufferWidth=640
• BackBufferHeight=480

CONFIG_EN.exe:

• 

If you use settings on your PC to upscale or downscale the resolution, return the scaling to 100% before taking screenshots.

Images taken should not be resized in an image editor before uploading.

Hiding GUI Elements

By default ENTER will hide the EfzRevival GUI, this is defined in EfzRevival.ini:

• ToggleDisplay=DIK_RETURN

If the battle HUD or background obscures a move or its hitboxes, a beta version of EfzRevival can be used to hide these elements:

EfzRevival 1.02i - test2

After installing, edit EfzRevival.ini and under the [Practice] section add:

• KillBG=DIK_T

When T is pressed, the background will toggle between black and white which can be useful for creating contrast.

After disabling the background, if you quit the match with ESC and start a new match the background will reappear but without the battle HUD. This can be useful to hide the battle HUD for screenshots without removing the background. To get the battle HUD back, restart the game.

I have more questions!

If you have any questions regarding the wiki, feel free to ask them in the EFZ Discord or make a new topic on the EFZ wiki talk page.